View KM110BH2130_8375874.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

d a t a sh eet preliminary speci?cation supersedes data of november 1994 file under discrete semiconductors, sc17 1996 nov 12 discrete semiconductors km110bh/2130; km110bh/2190 angle sensor hybrid
1996 nov 12 2 philips semiconductors preliminary speci?cation angle sensor hybrid km110bh/2130; km110bh/2190 description sensor module for contactless measurement of angular displacements of strong magnetic fields. the module is a ready-trimmed (sensitivity and zero point) combination of the magnetoresistive sensor kmz10b and a signal conditioning circuit in hybrid technology. the km110bh/2130 delivers a linear output signal that is proportional to the direction of the magnetic field. the km110bh/2190 delivers a sinusoidal signal. for new design-ins the km110bh/23 and km110bh/24 modules are recommended. pinning pin configuration pin description 1 ground 2v cc 3v o fig.1 simplified outline. f page mbb575 - 1 123 quick reference data limiting values in accordance with the absolute maximum rating system (iec 134). note 1. if pin 3 is shorted to either pin 1 or pin 2, current may flow permanently, without damage to the device. symbol parameter min. typ. max. unit v cc dc supply voltage - 5 - v v o output voltage range 0.5 - 4.5 v a angle range km110bh/2130 - 15 - +15 deg km110bh/2190 - 45 - +45 deg t op operating temperature - 40 - +125 c symbol parameter min. max. unit v cc supply voltage 4.5 5.5 v i cc supply current - 20 ma t stg storage temperature - 40 +125 c t op operating temperature - 40 +125 c output short-circuit duration permanent (see note 1)
1996 nov 12 3 philips semiconductors preliminary speci?cation angle sensor hybrid km110bh/2130; km110bh/2190 characteristics t amb =25 c; v cc = 5 v and a homogeneous magnetic ?eld h ext = 100 ka/m in the sensitive layer of the kmz sensor; unless otherwise speci?ed. notes 1. refer to fig.3. the magnetic field can be produced by using the first magnet listed in table 1. other magnets, along with their required distances from the front of the kmz sensor, are also given. 2. valid for h ext = . the real field strength of 100 ka/m gives a slightly higher operating angle range of 46.5 deg. 3. the sensitivity will change slightly with +0.33% per 10% magnetic field increase if h ext deviates from 100 ka/m. 4. deviation from best straight line in angle range. symbol parameter conditions min. typ. max. unit a angle range (note 1) km110bh/2130 - 15 - +15 deg km110bh/2190 note 2 - 45 - +45 deg v o output voltage range km110bh/2130 linear; see fig.4 0.5 - 4.5 v km110bh/2190 sinusoidal; see fig.5 0.5 - 4.5 v v zero zero point voltage a = 0 deg - 2.5 - v v off zero point offset voltage km110bh/2130 - 45 - +45 mv km110bh/2190 - 35 - mv s sensitivity (note 3) a = 0 deg km110bh/2130 - 139 - mv/deg km110bh/2190 - 70 - mv/deg fl deviation of linearity (note 4) km110bh/2130 -- 1 %/fs km110bh/2190 --- %/fs sp max maximum angular speed km110bh/2130 - 10 - deg/ms km110bh/2190 - 30 - deg/ms r l load resistance 10 -- k w temperature coef?cients ( - 40 to +85 c) tcv zero temperature coef?cient of zero point voltage km110bh/2130 - 0.6 - mv/k km110bh/2190 - 0.3 - mv/k tcs temperature coef?cient of sensitivity - 200 - ppm/k
1996 nov 12 4 philips semiconductors preliminary speci?cation angle sensor hybrid km110bh/2130; km110bh/2190 fig.2 circuit diagram. handbook, full pagewidth mbb577 sensor angle range temperature compensation current limiter gnd v cc v o fig.3 optimum magnet position relative to the sensor module. handbook, full pagewidth mbb576 - 1 n s gnd v cc v o a reference side for a definition d
1996 nov 12 5 philips semiconductors preliminary speci?cation angle sensor hybrid km110bh/2130; km110bh/2190 fig.4 output signal of km110bh/2130. handbook, full pagewidth mbb578 angle a 4.5 v 2.5 v 0.5 v v out v cc = 5 v - 0 - 15 15 - 30 30 - 45 45 fig.5 output signal of km110bh/2190. handbook, full pagewidth mbb579 4.5 v 2.5 v 0.5 v angle a - 0 - 15 15 - 30 30 - 45 45 v out v cc = 5 v
1996 nov 12 6 philips semiconductors preliminary speci?cation angle sensor hybrid km110bh/2130; km110bh/2190 table 1 magnets for angle sensor hybrids notes 1. the magnetization is always parallel to the last dimension given for each magnet type. 2. between magnet and kmz sensor front as shown in fig.3. 3. special care must be taken to avoid exposure of ndfeb magnets to moisture or vapour. application in life-support systems, the behaviour of electronic components throughout their working life can be unpredictable. the use of these devices in support systems can only be permitted when there is no danger to life caused by devices failing unexpectedly. magnets hybrid angle sensors material dimensions (1) (mm) temp. range ( c) distance d (2) (mm) angle range corresponding to v o = 0.5 to 4.5 v temp. range ( c) /2130 /2190 ndfeb (note 3) 11.2 5.5 8 - 55 to +110 2.5 30 93 - 40 to +125 ndfeb (note 3) 6 3 5 0.8 smco 11.2 5.5 8 - 55 to +125 2.0 30 93 smco 6 3 5 0.6 fxd 330 10 7 8 - 55 to +125 0.5 30.5 94.5 fxd 330 7 5 4 0.2 30 93
1996 nov 12 7 philips semiconductors preliminary speci?cation angle sensor hybrid km110bh/2130; km110bh/2190 package outline fig.6 km110bh/2130; km110bh/2190. dimensions in mm. area a free of smd devices. (1) sensitive layer below kmz front. handbook, full pagewidth mbb574 - 1 a a 8.45 0.2 16.93 0.25 0.03 19.05 0.25 0.05 9.5 0.2 standoff = 1 0.5 6 0.5 123 2.54 2.54 3.2 max 0.35 max 0.35 (1) 0.76 0.08 0.8 min 0.8 min 0.8 min a
1996 nov 12 8 philips semiconductors preliminary speci?cation angle sensor hybrid km110bh/2130; km110bh/2190 definitions life support applications these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips for any damages resulting from such improper use or sale. data sheet status objective speci?cation this data sheet contains target or goal speci?cations for product development. preliminary speci?cation this data sheet contains preliminary data; supplementary data may be published later. product speci?cation this data sheet contains ?nal product speci?cations. limiting values limiting values given are in accordance with the absolute maximum rating system (iec 134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the speci?cation is not implied. exposure to limiting values for extended periods may affect device reliability. application information where application information is given, it is advisory and does not form part of the speci?cation.
1996 nov 12 9 philips semiconductors preliminary speci?cation angle sensor hybrid km110bh/2130; km110bh/2190 notes
1996 nov 12 10 philips semiconductors preliminary speci?cation angle sensor hybrid km110bh/2130; km110bh/2190 notes
1996 nov 12 11 philips semiconductors preliminary speci?cation angle sensor hybrid km110bh/2130; km110bh/2190 notes
internet: http://www.semiconductors.philips.com philips semiconductors C a worldwide company ? philips electronics n.v. 1996 sca52 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. netherlands: postbus 90050, 5600 pb eindhoven, bldg. vb, tel. +31 40 27 82785, fax. +31 40 27 88399 new zealand: 2 wagener place, c.p.o. box 1041, auckland, tel. +64 9 849 4160, fax. +64 9 849 7811 norway: box 1, manglerud 0612, oslo, tel. +47 22 74 8000, fax. +47 22 74 8341 philippines: philips semiconductors philippines inc., 106 valero st. salcedo village, p.o. box 2108 mcc, makati, metro manila, tel. +63 2 816 6380, fax. +63 2 817 3474 poland: ul. lukiska 10, pl 04-123 warszawa, tel. +48 22 612 2831, fax. +48 22 612 2327 portugal: see spain romania: see italy russia: philips russia, ul. usatcheva 35a, 119048 moscow, tel. +7 095 247 9145, fax. +7 095 247 9144 singapore: lorong 1, toa payoh, singapore 1231, tel. +65 350 2538, fax. +65 251 6500 slovakia: see austria slovenia: see italy south africa: s.a. philips pty ltd., 195-215 main road martindale, 2092 johannesburg, p.o. box 7430 johannesburg 2000, tel. +27 11 470 5911, fax. +27 11 470 5494 south america: rua do rocio 220, 5th floor, suite 51, 04552-903 s?o paulo, s?o paulo - sp, brazil, tel. +55 11 821 2333, fax. +55 11 829 1849 spain: balmes 22, 08007 barcelona, tel. +34 3 301 6312, fax. +34 3 301 4107 sweden: kottbygatan 7, akalla, s-16485 stockholm, tel. +46 8 632 2000, fax. +46 8 632 2745 switzerland: allmendstrasse 140, ch-8027 zrich, tel. +41 1 488 2686, fax. +41 1 481 7730 taiwan: philips taiwan ltd., 23-30f, 66, chung hsiao west road, sec. 1, p.o. box 22978, taipei 100, tel. +886 2 382 4443, fax. +886 2 382 4444 thailand: philips electronics (thailand) ltd., 209/2 sanpavuth-bangna road prakanong, bangkok 10260, tel. +66 2 745 4090, fax. +66 2 398 0793 turkey: talatpasa cad. no. 5, 80640 gltepe/istanbul, tel. +90 212 279 2770, fax. +90 212 282 6707 ukraine : philips ukraine, 4 patrice lumumba str., building b, floor 7, 252042 kiev, tel. +380 44 264 2776, fax. +380 44 268 0461 united kingdom: philips semiconductors ltd., 276 bath road, hayes, middlesex ub3 5bx, tel. +44 181 730 5000, fax. +44 181 754 8421 united states: 811 east arques avenue, sunnyvale, ca 94088-3409, tel. +1 800 234 7381 uruguay: see south america vietnam: see singapore yugoslavia: philips, trg n. pasica 5/v, 11000 beograd, tel. +381 11 625 344, fax.+381 11 635 777 for all other countries apply to: philips semiconductors, marketing & sales communications, building be-p, p.o. box 218, 5600 md eindhoven, the netherlands, fax. +31 40 27 24825 argentina: see south america australia: 34 waterloo road, north ryde, nsw 2113, tel. +61 2 9805 4455, fax. +61 2 9805 4466 austria: computerstr. 6, a-1101 wien, p.o. box 213, tel. +43 1 60 101, fax. +43 1 60 101 1210 belarus: hotel minsk business center, bld. 3, r. 1211, volodarski str. 6, 220050 minsk, tel. +375 172 200 733, fax. +375 172 200 773 belgium: see the netherlands brazil: see south america bulgaria: philips bulgaria ltd., energoproject, 15th floor, 51 james bourchier blvd., 1407 sofia, tel. +359 2 689 211, fax. +359 2 689 102 canada: philips semiconductors/components, tel. +1 800 234 7381 china/hong kong: 501 hong kong industrial technology centre, 72 tat chee avenue, kowloon tong, hong kong, tel. +852 2319 7888, fax. +852 2319 7700 colombia: see south america czech republic: see austria denmark: prags boulevard 80, pb 1919, dk-2300 copenhagen s, tel. +45 32 88 2636, fax. +45 31 57 1949 finland: sinikalliontie 3, fin-02630 espoo, tel. +358 9 615800, fax. +358 9 61580/xxx france: 4 rue du port-aux-vins, bp317, 92156 suresnes cedex, tel. +33 1 40 99 6161, fax. +33 1 40 99 6427 germany: hammerbrookstra?e 69, d-20097 hamburg, tel. +49 40 23 53 60, fax. +49 40 23 536 300 greece: no. 15, 25th march street, gr 17778 tavros/athens, tel. +30 1 4894 339/239, fax. +30 1 4814 240 hungary: see austria india: philips india ltd, shivsagar estate, a block, dr. annie besant rd. worli, mumbai 400 018, tel. +91 22 4938 541, fax. +91 22 4938 722 indonesia: see singapore ireland: newstead, clonskeagh, dublin 14, tel. +353 1 7640 000, fax. +353 1 7640 200 israel: rapac electronics, 7 kehilat saloniki st, tel aviv 61180, tel. +972 3 645 0444, fax. +972 3 649 1007 italy: philips semiconductors, piazza iv novembre 3, 20124 milano, tel. +39 2 6752 2531, fax. +39 2 6752 2557 japan: philips bldg 13-37, kohnan 2-chome, minato-ku, tokyo 108, tel. +81 3 3740 5130, fax. +81 3 3740 5077 korea: philips house, 260-199 itaewon-dong, yongsan-ku, seoul, tel. +82 2 709 1412, fax. +82 2 709 1415 malaysia: no. 76 jalan universiti, 46200 petaling jaya, selangor, tel. +60 3 750 5214, fax. +60 3 757 4880 mexico: 5900 gateway east, suite 200, el paso, texas 79905, tel. +9-5 800 234 7381 middle east: see italy printed in the netherlands 147021/1200/02/pp12 date of release: 1996 nov 12 document order number: 9397 750 01127

▲Up To Search▲

Price & Availability of KM110BH2130

	To Download KM110BH2130 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .